Need help?Do you have a question about the Potterton Heatmax Combi HE Range and is the answer not in the manual?
General| Fuel Type | Natural Gas |
|---|---|
| Warranty | 2 Years |
| ERP Rating | A |
| Type | Combi |
| Mounting | Wall-mounted |
| Operating Pressure | 3 bar |
| Output Range | 24kW to 30kW |
| Central Heating Max Power | 24kW to 30kW |
| Hot Water Max Power | 24kW to 30kW |
Details ON/OFF/Reset switch, display, temperature controls, pressure gauge, and operational indicators.
Guides checks for gas, electricity, switch position, display, and operational indicators for boiler function.
Addresses system pressure issues, error codes (E133, E110), and low pressure fault (E119).
Verifies timer settings and room thermostat temperature for proper heating activation.
Advises contacting an installer or service engineer for complex issues or unresolved problems.
Explains pressure gauge readings, normal operating range, and indications of faults.
Step-by-step guide to safely add water to the heating system using the filling loop.
Details required clearances for installation, operation, servicing, and general safety precautions.
Instructions for cleaning the outer case and details on frost and pump protection features.
Explains error code display, lists common codes, and their meanings for fault diagnosis.
Covers legal requirements for installation, competence, and servicing by Gas Safe engineers.
Explains the role and necessity of the Benchmark Commissioning Checklist for installation and warranty.
Critical safety steps if gas is detected: shut off supply, ventilate, and vacate premises.
Advises against using faulty boilers and outlines steps for gas/water leaks, including isolation.
Details warranty registration, the requirement for annual servicing by a Gas Safe engineer.
Guides users on contacting installers and the heateam service for boiler issues and general advice.
Specifies what the warranty covers (manufacturing faults) and what it excludes (installation, damage).
To Next Page
