Need help?Do you have a question about the Potterton Titanium 12 Heat and is the answer not in the manual?
General| Type | Gas Boiler |
|---|---|
| Mounting | Wall Mounted |
| Output | 12 kW |
| Central Heating Output (kW) | 12 kW |
| Fuel Type | Gas |
| Fuel | Natural Gas |
| Efficiency | 91.1% |
| ERP Rating | A |
| Dimensions (HxWxD) | 625 x 370 x 270 mm |
| Hot Water Output (kW) | 12 kW |
Lists appliance models with their corresponding Alpha and Gas Council numbers.
Identifies key component parts used in the Potterton Titanium Heat models.
Explains the meaning of LED patterns for various operational states and fault conditions.
Provides wiring diagrams for Y Plan and S plan heating systems.
Shows the internal electrical layout of the boiler and component connections.
Lists electrical checks, pinouts, voltages, and resistances for key components.
Outlines the procedure for checking the operational gas inlet pressure at the gas cock.
Provides methods and data for measuring the gas rate of different boiler models.
Details the step-by-step process for setting the air/gas ratio for full and part load conditions.
Explains the boiler's blocking and lock-out modes and their causes.
Defines temporary blocking mode and lists shutdown codes with their meanings.
Describes lock-out mode and lists error codes with their meanings.
Explains how to perform a hard reset after multiple lock-outs.
Provides general safety warnings and recommendations for boiler servicing and checks.
Details checks for combustion performance, flue system integrity, and component condition.
Advises using only Baxi Genuine Parts for replacements.
Lists key spare parts with their reference codes and manufacturer part numbers.
To Next Page