Need help?Do you have a question about the Potterton Paramount three 80 and is the answer not in the manual?
Outlines critical safety warnings and precautions for installation and use.
Details the physical dimensions and connection points of the boiler unit.
Provides detailed technical specifications for various boiler models.
Illustrates the electrical connections and wiring schematics for the boiler.
Outlines the necessary quality and treatment for the heating circuit water.
Details procedures for determining system volume and using water additives.
Provides guidance on using antifreeze in heating systems with aluminium heat exchangers.
Specifies conditions and precautions for selecting a suitable installation location.
Instructions for connecting the heating circuit, including filter recommendations.
Details on connecting the safety valve and requirements for its blow-off line.
Guidelines for the proper disposal of condensate and installation of neutralization plants.
Information on designing the flue gas pipe system and type approvals.
Presents tables with specifications for different exhaust gas system types and sizes.
Instructions for assembling the exhaust gas system, including slopes and pipe shortening.
Outlines requirements for gas connection installation, including specialist involvement.
Emphasizes checking the entire gas inlet pipe for leakages before commissioning.
Specifies the required supply pressure ranges for natural gas and liquid gas.
Explains the importance of checking CO2 content and potential risks of incorrect values.
Provides guide values for gas flow, jet pressure, and CO2 content.
Outlines general guidelines and safety warnings for electrical connections.
Provides step-by-step instructions for safely switching on the boiler.
Details the information and checks to be provided to the customer during commissioning.
A checklist for commissioning activities to ensure proper setup and operation.
Identifies and describes the function of each control element on the operating unit.
Explains the meaning of symbols and displays shown on the boiler's interface.
Guides on how to set the comfort setpoint for room temperature control.
Describes how to interpret and obtain more information about error messages displayed.
Outlines the steps to navigate and select setting levels for programming.
Explains how to modify parameters and provides an example for setting time and date.
A comprehensive table listing configurable parameters, their program numbers, levels, and standard values.
Covers settings for comfort, reduced, and frost protection setpoints, and heating curves.
Covers settings for nominal and reduced setpoints for domestic hot water.
Covers boiler operation settings like release temperature, setpoints, and burner control.
Details settings for solar heating control, including temperature differences and collector pump.
Settings for buffer storage tank, including heat generation lock and temperature differences.
Settings related to DHW storage, such as charge push forward time and flow setpoint boost.
Explains how fault messages, diagnostic codes, and error history are displayed and managed.
Details settings related to burner operation, including prepurge, ignition, and postpurge times.
Recommends annual maintenance and lists key inspection and service tasks.
Provides a step-by-step guide on how to remove the gas burner for cleaning.
Emphasizes ensuring shock-proof protection by correctly screwing on all parts.
A table listing fault codes, their descriptions, and potential explanations/causes.
To Next Page
General