8. Programming
8.1 Programming procedure
The selection of the setting levels and menu points are setting as follow:
1.
Press OK button
=> It appears the display Enduser
2.
Press the Info button for approx. 3 s
=> It appears the setting levels
3.
Select the required setting level with the control knob.
Programming levels
- Enduser (Eu)
- Commissioning (C),
incl. enduser (Eu)
- Engineer (E),
incl. enduser (E) and commissioning (C)
- OEM,
includes all other setting levels (password-protected)
4. Press OK button
Programming
48 Paramount three 30-115 kW 7308272-03 03.14
To Next Page
Loading...
