Need help?Do you have a question about the Potterton Titanium and is the answer not in the manual?
General| Model | Titanium |
|---|---|
| Efficiency Rating | A |
| Category | Boiler |
| Mounting | Wall Mounted |
| Domestic Hot Water Flow Rate at 35°C Rise | 9.8 l/min |
Provides critical instructions for correctly routing and installing the condensate drain pipe.
Covers unpacking, wall plate fitting, and initial system flushing.
Details boiler mounting, pressure relief pipe, condensate drain, and flue fitting.
Instructions for installing the standard horizontal flue system.
Instructions for installing vertical concentric flue extensions.
Explains wiring for external controls and preliminary electrical system checks.
Covers system checks, pressure, gas supply, and initial operation.
Details procedures for verifying gas pressure and rate during commissioning.
Outlines steps for annual servicing, combustion checks, and inspections.
Explains how to adjust the gas valve to achieve correct CO2 levels.
Provides a comprehensive wiring diagram for all boiler components.
Step-by-step guide for diagnosing faults in central heating mode.
Step-by-step guide for diagnosing faults in domestic hot water mode.
Detailed diagnostic steps for specific fault conditions.
Detailed diagnostic steps for specific fault conditions.
Detailed diagnostic steps for specific fault conditions.
A mandatory checklist for installers to confirm compliance and handover.
To Next Page