Power Acoustik PD-710B - 99-6700 Kit Assembly - DIN Radio; DIN Radio Provision Installation

4.2
Kit Assembly 99-6700
1.
Slide the DIN cage into the kit
and secure by bending the metal
locking tabs down.
2.
Slide the aftermarket radio into the
cage until secure. (Figure A)
3.
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4.
Reassemble dash in reverse order
of disassembly. (Figure B)
DIN radio provision Notes
(Figure A)
(Figure B)