Power Acoustik PD-710B - Dash Disassembly Procedures INST-6000; Chrysler Cirrus;Dodge Stratus;Plymouth Breeze Dash Disassembly; Chrysler Concorde;LHS;Dodge Intrepid;Eagle Vision Dash Disassembly

6 .1
1. Remove (2) Phillips screws above the
radio opening. (Figure A)
2.
Remove (2) Phillips screws above the
climate controls. (Figure A)
3.
Unclip the dash trim bezel and remove.
4. Remove (2) 3/8” hex-head screws securing the
factory radio and disconnect the wiring.
Chrysler Cordoba 1979-
1983/Imperial 1982-1983/
Newport 1980-1981/New
Yorker 1980-1981, Dodge
Mirada 1980-1983/St.
Regis 1979-1981
Dash Disassembly INST-6000
1. Using a flat-blade
screwdriver, pry out on
the edges of the radio
trim bezel.
2. Unclip the bezel
and remove.
3.
Remove (2) 3/8”
hex-head screws
securing the factory
radio and disconnect
the wiring.
Chrysler Cirrus/Dodge
Stratus 1995-2000,
Plymouth Breeze 1996-1999
1. Remove (4) Phillips screws from the bottom edge
of the radio trim bezel.
2.
Remove (2) Phillips screws above the radio
opening. (Figure A)
3.
Unscrew the retainer ring securing the remote
mirror control and remove the bezel.
4.
Remove (2) 3/8” hex-head screws securing the
factory radio and disconnect the wiring.
Chrysler Cordoba/
Plymouth Fury 1975-1978,
Dodge Charger 1974-1978,
Magnum XE 1978-1979
1. Unclip the radio trim
bezel and remove.
2.
Remove (2) 3/8”
hex-head screws
securing the factory
radio and disconnect
the wiring.
Chrysler Concorde/LHS
1995-1998, Dodge Intrepid/
Eagle Vision 1993-1997