! Electromagnetic Compatibility
(EMC) Precautions
The my7 model is suitable for use
in all consumer and commercial
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
The my7 model emits electromagnetic
energy to perform its intended function.
Nearby electronic equipment may be
aected by this emission. Similarly
the My7 model may be aected by
electromagnetic emissions from other
equipment in the vicinity.
– Floors should be wood, concrete or
ceramic tile. If the oor is covered with
synthetic material, the relative humidity in
the room should be at least 30%.
– Power quality should be that of a typical
domestic, commercial or hospital
environment as appropriate.
– The my7 model should not be used
during power interruptions.
– Power frequency magnetic elds should
be at levels characteristic of a typical
location in a typical commercial or
hospital environment.
The my7 model is intended for use in an
electronic environment in which radiated
radio-frequency (RF) disturbances
are controlled.
The customer or user of the my7 model
can help prevent electromagnetic
interference by maintaining a minimum
distance between portable and
mobile RF communications equipment
(transmitters) and the My7 model as
recommended in this user manual,
according to the maximum output power
of the communications equipment:
The adequate separation distance
to provide base immunity to RF
disturbances is 1.0m/ 3.3 feet.
Retain this user manual for your future
reference.
4
To Next Page
Loading...
