Page 7 of 41
OPERATING SAFETY
Before operating this generator, be sure to read and understand all instructions. This
generator set has been designed for safe operation in a specific application. DO NOT
modify or use this generator set for any application other than that it has been designed for.
Improper usage can cause damage, injury, or death. All installation and service work must
be performed by properly trained and qualified personnel. Electrical installation,
troubleshooting, and repair should only be performed by a qualified electrician.
The following guidelines should always be obeyed.
Read, understand and follow all safety precautions and warnings before operating the generator
set.
Be sure to read and follow all safety decals affixed to the generator set.
DO NOT modify the generator set. Unauthorized modifications may affect the life of the generator
set; as well as, result in injury or death.
The area around the generator set should be clean and free of debris.
DO NOT operate machinery or equipment while under the influence of alcohol, medication, other
drugs, or while fatigued.
When connecting the generator set, be sure to follow any local, state, and National Electric Code
(NEC) guidelines.
Accidental Start-up
This generator set may start without warning. While in operation, there may be exposed moving parts.
Before working on the generator set or connected equipment, ensure the generator set is
disabled. The genset may be disabled by first properly shutting down the generators set. Next,
disconnect the battery cables, negative (-) lead first, and/or turn the battery disconnect switch (if
equipped) to the OFF position.
WARNING
Accidental start-up.
Can cause severe injury or death.
Moving Parts.
Will cause severe injury or death.
To Next Page
Loading...
Need help?
General
