Power Tech Generators PTSMH-15 - Engine Specifications; Service Parts

ENGINE SPECIFICATIONS
SERVICE PARTS
Power Technology Part #
Filters:
Oil ----------------------------------------------------------------------------------- 01FO091
Fuel ---------------------------------------------------------------------------------- 08FF081
Air with Metal Canister----------------------------------------------------------- 04FA080
Air with Plastic Canister---------------------------------------------------------- 04FA2E1
Belts:
With Alternator ------------------------------------------------------------------- 03BF0203
With Idler Pulley ----------------------------------------------------------------- 03BF9447
Radiator Hoses:
Upper ----------------------------------------------------------------------------- 03HS0203U
Lower ----------------------------------------------------------------------------- 03HS0203L
3
MODEL
V-1505-T
V-1903-BG V-2003-T V-2203-BG
Air Induction Turbo-Charged
Naturally Aspirated Turbo-Charged Naturally Aspirated
Continuous Output 25.5 HP @ 1800 rpm
26 HP @ 1800 rpm 36.6 HP @ 1800 rpm 32.5 HP @ 1800 rpm
Cubic Capacity
68.53 in³ (1.123 L)
113.32 in³ (1.85L) 121.99 in³ (1.99L) 134.07 in³ (2.19L)
Bore and Stroke
3.07” x 3.09”
(78.0 x 78.4mm)
3.15x3.64
(80x92.4mm)
3.27x3.64
(83x92.4mm)
3.43x3.64
(87x92.4mm)
Cylinder Arrangement
3 In-Line
4 In-Line 4 In-Line 4 In-Line
Firing Order
1-2-3
1-3-4-2 1-3-4-2 1-3-4-2
Compression Ratio
22:1
23:1 22:1 23:1
Engine Oil Capacity
5.38qts. (5.1L)
8.5 qts. (8.04L) 8.5 qts. (8.04L) 8.5 qts. (8.04L)
Fuel and Type
Diesel 4 Cycle
Diesel 4 Cycle Diesel 4 Cycle Diesel 4 Cycle
Minimum Fuel Consumption
See Specification Chart
See Specification Chart See Specification Chart See Specification Chart