Power2max NGeco Manual

Contents
Introduction 20
Warning 20
Scope of delivery 20
Operation and installation 21
Necessary tools 21
Operation 21
Installation 22
Using your power meter 24
Before your ride 24
During your ride 24
Zero-point adjustment and thermal correction 24
Battery life 24
After your ride 24
Changing the battery 25
Turning the power meter on and off 25
After a crash 25
Maintenance and care 26
Service, calibration and control of function 26
Repair 26
Troubleshooting 27
Technical specifications 28
Declaration of conformity 29
Disposal 30
Warranty 31
Scope of the warranty 31
Local regulations 31
For consumers in Australia 31
Limitation of liability 31
Warranty disclaimer 32
Legal Notes 33
Copyright 33
Trademarks 33
Changes and errors 33
Contact 34
power2max NG
Eco
19
English

Power2max NGeco Specifications

Battery

battery life	400 hours
battery charge indicator	3 x green: 60 - 100%, 2 x green: 40 - 60%, 1 x green: 20 - 40%, 1 x red short: 10 - 20%, 1 x red long: 0 - 10%

Transmission and Accuracy

transmission standards	ANT+ Power Only Profile
accuracy	±2%
transmitted data	Power, Cadence

Measurement Range

power range	10 - 2999 W
torque range	0 - 250 Nm
cadence range	30 - 250 RPM