Maintenance and care
The battery cap should be checked occasionally to see whether it is seated correctly and, if
necessary, it should be replaced so that it maintains its waterproof seal.
After longer rides in the rain, please examine if water has penetrated the battery compart-
ment. Should this be the case, allow this area to dry out while having removed the battery
and with the battery cap off. You can assist in this process by using an absorbent cloth.
Do not use thinners or solvents to clean your power2max NG
eco
power meter. Use clear water
or soapy water and a soft sponge or rag.
IMPORTANT:
Do not clean your power meter with a high-pressure power hose!
Service, calibration
and control of function
The power2max NG
eco
power meter is calibrated at the factory and doesn’t have to be newly
calibrated within the warranty period. Regardless of this fact, you still have the option of
ordering a calibration and function control at ww w . powe r2ma x . com . In this case, we will
examine your power2max NG
eco
power meter on the outside, perform a new factory calibrati-
on and control of function. In addition to your power2max NG
eco
power meter, you also
receive a new test and approval certificate.
IMPORTANT:
Ordering a calibration and function control can be advisable after a crash, among other things.
However, it does not extend warranty coverage and only excludes a possible liability resulting
from mechanical damage that has not been identified.
Repair
To a certain degree, repairing a power2max NG
eco
power meter is possible.
In case of need, please contact suppor t @ power2m ax . de .
power2max NG
Eco
26
English
To Next Page
Loading...
Need help?
Battery
Transmission and Accuracy
