Power2max NGeco - Technical Specifications

Technical specifications
Weight depending on the version – details on the website
Power source battery CR2450
Battery life approx. 400 hours of active power measurement
Transmission standards ANT+ Power Only Profile
BLE Cycling Power Profile
Accuracy ± 2 %
Transmitted data Power
Cadence
Transmitted data, optional Links-Rechts-Verteilung („Balance“)
Anmerkung:
Leistung links = Druck linkes Pedal + Zug rechtes Pedal;
Leistung rechts = Druck rechtes Pedal + Zug linkes Pedal
Gleichmäßiges Treten („Pedal Smoothness“)
Anmerkung: für beide Beine gemeinsam
Drehmoment
additional features - Active thermal correction
- Automatic zero-point adjustment
- Calibration is independent of chainring selection
- No magnet necessary for cadence measurement
Decorative colors power2max green, white, red, blue, black
RANGE OF MEASUREMENT AND DISPLAY
Power 10–2999 W
Torque 0–250 Nm
Cadence 20–250 RPM
Optional: Recht-Links-Verteilung 0–100 %
Optional: gleichmäßiges Treten 0–100 %
LED SIGNALS
Green blinking power meter activated,
BLE und ANT+ active for pairing with head unit
Red blinking short power meter error
Directly after activation:
3 x green battery charged 60–100 %
2 x green battery charged 40–60 %
1 x green battery charged 20–40 %
1 x red short battery charged 10–20 % (equates to “weak battery”)
1 x red long (5 seconds) battery charged 0–10 %
(fehlt in der
englischen
Fassung)
(fehlt in der
englischen
Fassung)
(fehlt in der
englischen
Fassung)
(fehlt in der
englischen
Fassung)
power2max NG
Eco
28
English