User’s Manual

power2max NGeco

deutsch

1 Quick Start Guide

Warning

Please read the user’s manual carefully before installation and use! Improper installation can cause

accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque

values when installing screws and bolts. (See installation instructions at www.power2max.com.)

Before going on a ride, get to know the functions and operation of your power meter. Get a checkup

from a sports physician before starting your training program. Pay attention to traffic and road

conditions before checking any data.

Quick start guide

Thank you for choosing a power2max NGeco power meter!

Scope of delivery

Included:

power meter power2max NGeco

Quick Start Guide including inspection certificate

Optional:

Lockring tool

power meter crankset

bottom bracket

chainring set

chainring bolts

Installation and operation:

1. Remove the red isolation strip by pulling it out of the battery compartment. (You do not

need to open the battery compartment.)

2. The LED indicator is now flashing green. Please connect the power meter to your head unit

(observe manufacturer’s instructions).

3. Install the chainrings to the power meter (observe manufacturer’s instructions and torque

values!).

4. Install the power meter to the crankset (observe manufacturer’s instructions and torque

values!).

5. Install the crankset to the bicycle (observe manufacturer’s instructions and torque values!).

After installing, check the function of the front derailleur and adjust as necessary.

Finished! Now: go ride and have fun with your power2max NGeco!

deutsch

Power2max NGeco - Page 2

Other manuals for Power2max NGeco