Power2max NGeco Manual

Step 5
Install the entire power meter unit with crankset to your bicycle. To do so, follow the
steps in the installation instructions provided by the crankset manufacturer. If necessary,
these can be requested from the crankset manufacturer or from a retail store. We recom-
mend checking the correct function of the front derailleur and, if needed, re-adjusting it.
IMPORTANT:
Observe the installation instructions prescribed by the manufacturer.
Initial operation and installation of your power2max NG
eco
power meter is thus completed.
You can go for a ride!
power2max NG
Eco
23
English

Power2max NGeco Specifications

Battery

battery life	400 hours
battery charge indicator	3 x green: 60 - 100%, 2 x green: 40 - 60%, 1 x green: 20 - 40%, 1 x red short: 10 - 20%, 1 x red long: 0 - 10%

Transmission and Accuracy

transmission standards	ANT+ Power Only Profile
accuracy	±2%
transmitted data	Power, Cadence

Measurement Range

power range	10 - 2999 W
torque range	0 - 250 Nm
cadence range	30 - 250 RPM