PowerBase 577146 - Adjusting the flower guard; Rotating the main handle for edging

19
Adjusting the flower guard
The flower guard (9) keeps plants and stalks that are not to be cut away
from the cutting lines.
• Fold down the flower guard (9) for trimming (Fig. 9).
• If the flower guard (9) is no longer required, it can be folded up flush
against the housing (park position) (Fig. 8).
Rotating the main handle for edging
NOTE: The best method of edging is performed with the main handle
rotated.
• Unplug the line trimmer.
• Press the rotational lock button (13) and rotate the main handle
clockwise (Fig. 10).
• Release the button when main handle (14) has been rotated 90° to the
edging position (Fig. 10a).
Fig. 8
Fig. 10
Fig. 9
Fig.10a
11
6
11
9
14
13