-19-
5. Setting up the door sequencer
Select the SEQUENCER point at the main menu; this takes you to the
following screen display:
The SETUP ASSISTANT is a new function in the Cockpit SRS which
has been included since software version 15; it makes the task of
programming the actual door sequencer function considerably easier.
The EXPERT MENU provides a very powerful programming interface,
with which you can program highly individual sequences, or
alternatively expand the settings previously entered using the SETUP
ASSISTANT.
The SETUP ASSISTANT describes the TASKs in the actual door
sequencer in accordance with the data you enter. The Assistant guides
you through the settings: everything you need to do is described on the
screen. These printed instructions simply provide additional information
which cannot be displayed on the PowerBox screen due to size
limitations.
The recommended programming procedure is as follows: first enter the
basic settings using the SETUP ASSISTANT. At this point the system
setup will be complete for 90% of all models. If you wish to add more
wheel doors or adjust the sequence to cater for other details, this can be
carried out in the EXPERT MENUE.
Select the SETUP ASSISTANT in the menu; this takes you to the
following screen display:
To Next Page
Loading...
Need help?
General