Need help?Do you have a question about the Powercom 1000VA and is the answer not in the manual?
Details the indicators and the ON/OFF/TEST/SILENCE button on the front of the UPS.
Describes the various ports and connectors located on the rear of the UPS unit.
Guidance on inspecting the UPS upon receipt and handling packaging materials.
Advice on selecting a suitable location for UPS installation regarding airflow and environment.
Steps for connecting the UPS to a computer for monitoring and control via software.
Instructions for attaching an optional external battery pack for extended runtime.
How to connect telephone or modem lines for surge protection through the UPS.
Procedure for connecting the UPS to the main AC power source to operate.
Information on charging the UPS battery, emphasizing initial charge duration for best results.
How to connect devices to the UPS output receptacles for protection.
How to verify the site wiring fault indicator for proper AC power outlet configuration.
Steps to power on the UPS and initiate its automatic self-testing sequence.
Procedures for safely turning off the UPS unit.
How to initiate a self-test to verify UPS and battery operational status.
How to temporarily silence audible alarms during backup power operation.
How to start the UPS from battery power without utility input.
How the UPS enters shutdown mode and can be controlled remotely for battery preservation.
Description of the slow audible alarm indicating the UPS is operating on battery power.
Description of the rapid audible alarm indicating critically low battery levels.
Description of the continuous audible alarm warning of an overloaded UPS.
Description of the continuous alarm and LED indicating battery failure or need for replacement.
Information on software for monitoring UPS status and performing orderly computer shutdowns during power failures.
Details about interface kits needed to connect UPS status signals to computer operating systems.
Guidelines for storing the UPS in a cool, dry location with its battery fully charged.
Recommendations for charging the UPS battery during extended storage in varying ambient temperatures.
General| Frequency | 50/60 Hz |
|---|---|
| Operating Temperature | 0-40°C |
| Output Power | 600W |
| Number of Outlets | 4 |
| Communication Interface | USB |
To Next Page
