What to do if the Powercom UPS is overloaded?
If the connected equipment requires more power than the Powercom UPS can provide, try shutting off non-essential equipment. The UPS should automatically return to normal operation once the power demand is reduced.
What to do if Powercom UPS is running on battery?
When your Powercom UPS is operating on battery power, it's important to save your data and perform a controlled shutdown of your systems.
What happens when Powercom UPS battery is low?
When the battery voltage is low, the Powercom UPS will shut down. It will restart automatically when sufficient power returns.
How to fix wrong input wiring on Powercom UPS?
To correct the input wiring on your Powercom UPS, turn the plug 180 degrees and plug it back in.
What to do if Powercom UPS AC line backed up wrong during auto restart?
If the AC line is backed up incorrectly during an auto restart of your Powercom UPS, reconfirm your main power and frequency.
What to do if Powercom UPS has high surrounding temperature?
If your Powercom UPS has a high surrounding temperature, make sure the fan is working and the ventilation is clear. If the problem persists, contact technical support.
What to do if Powercom UPS battery test is processing?
If your Powercom UPS is processing a battery test, it will return to normal operation after completion. No action is needed.
What to do if Powercom UPS battery is overcharged?
If the Powercom UPS battery is overcharged, turn off the UPS and contact technical support.
Lists compliance standards and directives for CE-marked products.
Details the contents of the UPS package and procedures for unpacking.
Instructions for physical setup, including rack mounting ears and tower stands.
Specifies recommended environmental conditions for optimal UPS performance and safety.
Illustrates and labels connectors on the rear panel of different UPS models.
Procedures for connecting external battery packs to the UPS system.
Guides on connecting the UPS to AC power and the equipment it protects.
How to connect the UPS to a computer for monitoring using USB or RS232 ports.
Information on the RS232 interface, pinout, and data signals.
Describes optional interface cards for expanded monitoring capabilities.
Explains the Emergency Power Off (EPO) port and its immediate shutdown function.
Explains Line Mode, Battery Mode, Free Run, and High Efficiency modes.
Details the Generator Mode for unstable power sources.
Outlines automatic and manual battery testing for reliability.
Factors and options for planning UPS system capacity and configuration.
Step-by-step guide for replacing internal batteries in rack-mount models.
Details on external battery packs, including specs and capacity.
Lists common error codes, alarms, and their corresponding solutions.
Detailed technical data for Tower Type UPS models (1000, 2000, 3000 VA).
Detailed technical data for Rack Mounting Type UPS models (1000, 2000, 3000 VA).
General| Capacity | 1000VA / 600W |
|---|---|
| Communication Interface | USB |
| Output Frequency | 50/60Hz |
| Input Frequency | 50/60Hz |
| Outlets | 4 |
| Output Voltage | 230V |
To Next Page
