Powercom 1000 - Rack Mounting Type Specifications

15
© All rights reserved. All trademarks are property of their respective owners.
Rack Mounting Type
Model
1000
2000
3000
Configuration
Capacity (VA)
1000 VA
2000 VA
3000 VA
Capacity (Watts)
1000 W
2000 W
3000 W
Form
Rack and Tower Type
Phase
Single Phase
Energy Saving
Yes - ECO Mode Efficiency >94%
Input
Voltage
208 / 220 / 230 / 240 Vac
Input Voltage Range
120 - 276 VAC, < 25% Load
140 - 276 VAC, < 50% Load
160 - 276 VAC, < 75% Load
180 - 276 VAC, < 100% Load
Input Frequency Range
50 / 60 Hz (Auto Sensing)
Input Power Factor
>0.97
Cold Start
Yes
Output
Rated Power Factor
1.0
Waveform
Pure Sine Wave
Voltage
208* / 220 / 230 / 240 Vac ± 2%
Frequency
50 / 60 Hz ±0.25 Hz
Transfer Time
0 ms
Harmonic Distortion
≦ 2.5% THD at Linear Load
Crest Factor
3 : 1
EPO Function
Option
Protection
Overload
Line Mode
105% - 120% for 30 seconds
Battery Mode
101% - 109% for 10 seconds
Surge Protection
IEC 61000-4-5 Level 3
Bypass
Internal Bypass (Automatic and Manual)
Short Circuit Protection
UPS Output Cut Off Immediately
Battery
Type
12V 7Ah
12V 7Ah
12V 9Ah
Quantity
3
6
6
Sealed, Maintenance Free
Yes
Typical Recharge Time
4 hr to 90%
External Battery Module
Option
External Battery Connector
Option
Management & Communication
LCD Control Panel
Yes
Communication Port
RS 232, USB B type
SNMP Slot
Option
Audible Alarms
Yes
Physical
Dimensions (WxDxH) (mm)
428x425x84
428x635x84
Weight (kgs)
14.7
26.2
29
Shipping Dimensions (mm)
546x552x206
550x750x220
Shipping Weight (kgs)
17.5
30
33.4
** Specifications are subject to change without further notice.
** Specifications are for reference, actual information should base on real product.
© All rights reserved. All trademarks are property of their respective owners. Specifications are subject to
change without notification.