7. Software options
7.1 Power Monitoring Software
The UPSMON series software (or other power monitoring software) is
applied standard RS-232 interface to perform monitoring functions, and then
provides an orderly shutdown of a computer in the event of power failure.
Moreover, UPSMON displays all the diagnostic symptoms on monitor, such
as Voltage, Frequency, Battery level and so on..
The software is available for DOS, Windows 3.1x, Windows 95, Windows
NT V3.5 or later, Novell Netware and others. Call your dealer for more
information on computer OS compatible solutions.
7.2 Interface Kits
A series of interface kits is available for operation systems that provide UPS
monitoring. Each interface kit includes the special interface cable required to
convert status signals from the UPS into signals which individual operating
system recognize. The interface cable at UPS side must be connected to
REMOTE PORT , at computer side can be either COM 1 or COM 2. The
other installation instructions and powerful features please refer to READ.ME
file.
Caution: Use only factory supplied or authorized UPS monitoring
cable !
10
To Next Page
Loading...
