EasyManua.ls Logo

Powercom 1000VA - UPS Specifications

Powercom 1000VA
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12. Specifications
MODEL KIN
800AP
KIN
1000AP
KIN
1200AP
KIN
1500AP
KIN
2200AP
Capacity
800VA
1000VA
1200VA
1500VA
2200VA
Voltage
INPUT
Frequency
Voltage
(on battery)
+/-5%
Frequency
(on battery)
50 or 60Hz +/-0.5%
Voltage
Regulation
AVR
AVR automatically increase output voltage 15% above input
13% below input voltage if+9% to +25% of nominal
Transfer time 2/4 milliseconds, including detection time
Spike Protection
320 Joules, 2ms
EMI/RFI filter 10dB at0.15MHz, 50dB at 30MHz
(for xxxAP models only)
Overload
Protection
60 second and 130% at 3 seconds.
Unit Input
10Base-T
Cable Port
Network (UTP, RJ-45)compatible jacks
OUTPUT
PROTECTION
And
FILTERING
Short Circuit
Type Sealed, maintenance-free lead acid batteries
With 3-6 years typical lifetime
Typical
Recharge Time
4 hours (to 90% of full capacity)
Protection Automatic self-test & Discharge protection, Replace battery
BATTERY
Back up Time
Net Weight
Kg(lbs)
13
(28.6)
15
(33.0)
15.2
(33.4)
15.6
(34.3)
26.2
(57.6)
Shipping Weight
Kg(lbs)
14.2
(31.2)
16.2
(35.6)
16.4
(36.1)
16.8
(36.9)
28.2
(62)
Dimension(mm)
WxDxH
130 x 382 x 201
169 x 448 x 227
PHYSICAL
Input Inlet
Battery
Back-Up
Slow beeping sound (about 0.47Hz)
Battery Low
ALARM
Overload
INTERFACE RS-232
Interface
Bi-directional communication port
Safety
CONFORMANCE
Surge
Ambient
operation
3,500 meters max. elevation, 0-95% humidity non-condensing
Audible noise
ENVIRONMENT
Storage
condition
15000 meters max. elevation
©1999 Powercom Co., Ltd. All right Reserved. All trademarks are property of their respective owners.
Specifications subject to change without notice.
14

Related product manuals