28
PowerDot Maintenance
PowerDot PD-02 device, together with its accessories, should be kept in PowerDot carry case and carefully
stored on a secure surface and protected conditions listed in the Warnings above.
Keep replacing your electrode pads after 20 uses as recommended. Deteriorated &
worn out pads can cause major discomfort during stimulation, affect the effectiveness
and even lead to minor injury.
Cleaning: only clean PowerDot device using a dry soft cloth.
Keep PowerDot device and electrode pads away from water. Store them in a dry
place, in protective packaging or in the PowerDot carry case.
PowerDot PD-02 devices do not require calibration or verification of performance parameters. The
characteristics are systemically verified and validated for each device manufactured. Those characteristics are
stable and do not vary when used under normal conditions.
The manufacturer states that PowerDot cannot be repaired by personnel external to the company. Any work
of this nature carried out by personnel not authorized by the manufacturer will be classified as tampering with
the unit, releasing the manufacturer from any responsibility with regards to the warranty and hazards that the
operator or user may be exposed to.
PowerDot Warranty
PowerDot PD-02 is covered by a worldwide warranty of 2 years, which comes into effect on the date of
purchase of the device (proof of purchase is required).
The warranty does not apply to the electrode pads and carry cases. Within the warranty period, manufacturer
will replace your faulty PowerDot or accessories at no charge (except shipping & handling fees in some
cases), provided that the product:
Has been used for the intended purpose and in the manner described in this manual
Has not been connected to an unsuitable power source
Has not been subjected to misuse or neglect
Has not been modified or repaired
Has not been damaged further by shock
Legal rights are not affected by this warranty.
To Next Page
Loading...
