35
Manufacturer & After-Sale Service:
Smartmissmo Technologies Pte Ltd
4 Shenton Way, #28-01 SGX Centre II
Singapore 068807
E-Mail: service@powerdot.com
Phone: +1-844-479-7368
Contact for any assistance in setting up, using, maintaining, or reporting unexpected operation or events.
EU AUTHORISED REPRESENTATIVE:
Medical Technology Promedt Consulting GbmH,
Altenhostrasse 80, 66386, St. Ingbert, Germany
Electromagnetic Compatibility (EMC)
PowerDot PD-02 is designed to be used in home healthcare environments in accordance with the EMC safety
standard IEC 60601-1-2 (4
th
Edition) and with limitations, defined by the warnings and precautions in this
manual (e.g. operation near RFID emitters, working microwave ovens, etc.).
Examples of home healthcare environment include restaurants, cafes, shops, stores, markets, schools,
churches, libraries, outdoors (streets, sidewalks, parks), domiciles (residences, homes, nursing homes),
vehicles (cars, buses, trains, boats, planes, helicopters), train stations, bus stations, airports, hotels, hostels,
pensions, museums, theatres.
PowerDot PD-02 is designed to support anticipated disturbance originating from electrostatic discharge,
magnetic fields for the power supply or radiofrequency emitters.
However, the performance of PowerDot PD-02 device can still affected by radio frequency fields originating
from other sources.
For more information about EMC emissions and immunity, contact the manufacturer.
The device should not be used adjacent to or stacked with other equipment. If adjacent
or stacked use is necessary, the device should be observed to verify normal operation in
the configuration in which it will be used.
The use of accessories, transducers and cables others than those specified or provided
by the manufacturer of this equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this equipment and result in
improper operation.
Portable RF communications equipment (including peripherals such as antenna cables
and external antennas) should be used no closer than 30 cm (12 inches) to any part of
the PowerDot PD-02, including cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment could result.
PowerDot PD-02 battery charging performance might degrade in the environments
To Next Page
Loading...
