PowerDot PD-02 - Bluetooth Connectivity

31


Voltage Interruptions:
0% U
T
; 250/300 cycle;
3) No
performance
degradation
observed
Voltage
Interruptions:
Performance
degradation
(device stopped
charging) has
been observed
only during
voltage
interruption
testing, but no
degradation
observed after
the testing
Bluetooth Connectivity
The unique feature of PowerDot system is that PowerDot stimulators are controlled through Bluetooth Low
Energy wireless radio interface.
PowerDot PD-02 is specifically designed to be used together with PowerDot Doctor App, which is supported
for the selected Apple iPad devices.
Secure Pairing
Your PowerDot is paired with your iPad using secure 8 digit numeric code which, by design, prohibits any
other mobile phones or wireless devices to connect to your PowerDot. Secure pairing takes place during
PowerDot activation process (see Activating PowerDot above) and, once your PowerDot becomes active,
numeric activation code is written into PowerDot’s flash memory and gets verified by your PowerDot Doctor
App after every PowerDot restart.
All Bluetooth commands sent from your mobile phone to PowerDot device are securely encrypted using
Bluetooth AES-128 encryption protocol.
Disconnections and Quality of Service
PowerDot Doctor App and PowerDot PD-02 Bluetooth communication interface are specifically designed to
accommodate temporarily and permanent Bluetooth disconnections during a stimulation session.
PowerDot PD-02 device is capable of independent execution of a pre-loaded stimulation program with the
latest intensity values as well as implements automatic Bluetooth re-connections.
In this regard, temporary radio frequency interference (e.g. caused by co-existence of multiple Bluetooth
and/or Wi-Fi devices in your range) should not affect the overall efficiency and safety of your stimulation
session.
Due to hardware-level emergency stop mechanisms (see Directions For Use), Bluetooth disconnections of
more permanent nature should not affect the safety of stimulation, and can only cause temporary
inconvenience by forcing you to postpone your planned stimulation session until a more favorable Bluetooth
connectivity environment is established.