10,000 psi
(700 bar)
Do not handle pressurised hoses and be sure they are clear of any possible reaction surface during operation.
Test couplers when coupled with hydraulic equipment for pressure test.
Always wear eye protection when operating or performing maintenance on this tool.
Always wear head and hand protection and protective clothing when operating this tool.
Do not carry the Hydraulic Torque Wrench with the help of hoses.
Do not attempt to support the Hydraulic Torque Wrench with the hands during operation.
Keep hands, loose clothing and long hair away from the reaction arm and working area during operation.
This Hydraulic Torque wrench will exert a strong reaction force. The reaction arm to be supported firmly to
control the reaction force. Do not position the reaction arm so that it tilts the Hydraulic Torque wrench off the
axis of the bolt.
Do not use the swivel inlets as a reaction stop.
This tool is not insulated against electric shock. When using this tool with a pump having an electrical power
make sure that the earthling is proper.
This tool is not designed for working in explosive atmospheres
Avoid sharp bends and kinks that will cause severe back-up pressure in hoses which will lead to premature
failure of the hose.
Use only impact sockets and accessories. Do not use hand (chrome) sockets or accessories.
Use only sockets and accessories that correctly fit the bolt or nut and function without tilting the tool off the
axis of the bolt.
We will not be held liable for any personal injury, property damage caused, interruption
of business, loss of profits, losses of any kind, etc., resulting from any failure that occurs from the
use of our product. Additionally, we will not be liable to repair or replace any product, which
has been damaged, used improperly or has been subject to an unauthorized repair by the purchaser
or a third party.)
Safety is one of our primary concerns. By following these few simple precautions you'll be sure
to obtain the most beneficial use of wrench system in the safest manner possible.
WHILE USING THE TOOL
Warning
Use accessories recommended by us.
3
PXD Series Operation Manual
To Next Page
Loading...
Need help?
General
