Powermate PX User Manual

1 - ENG
Heavy Duty Digital Tire Inflation Tool Instruction Manual
Mode D’emploi - Robuste Outil Numérique de Gonflage Pour Pneus
Herramienta Digital De Alto Rendimiento Para Inflar Neumáticos
Manual de instrucciones
200-3141, Rev. A, 9/13/18
Read and understand all safety precautions in this manual before operating. Failure
to comply with instructions in this manual could result in personal injury, property damage and/or voiding
of your warranty. The manufacturer WILL NOT be liable for any damage because of failure to follow these
instructions.
Lisez et veillez à bien comprendre toutes les consignes de sécurité de
ce manuel avant d’utiliser l’appareil. Toute dérogation aux instructions contenues dans ce manuel peut
entraîner l’annulation de la garantie, causer des blessures et/ou des dégâts matériels. Le fabricant NE
SAURA être tenu responsable de dommages résultant de l’inobservation de ces instructions.
Lea y comprenda todas las precauciones de seguridad contenidas en este
manual antes de utilizar esta unidad. Si no cumple con las instrucciones de este manual podría ocasionar
lesiones personales, daños a la propiedad y/o la anulación de su garantía. El fabricante NO SERÁ
responsable de ningún daño por no acatar estas instrucciones.
Model No.
P024-0375SP

Powermate PX Specifications

General

Brand	Powermate
Model	PX
Category	Tools
Language	English

Summary

Instruction Manual Overview

General Safety Warnings

Summarizes critical safety precautions and liability disclaimers before operating the equipment.

Safety Guidelines and Definitions

Safety Alert Symbol and Hazard Definitions

Explains safety alert symbols and hazard definitions like DANGER, WARNING, and CAUTION.

General Safety Instructions

Covers essential safety practices regarding electric shock, fire, and general injury risks.

Work Area Safety Precautions

Addresses safety related to the work area, including explosion, fire, and keeping bystanders away.

Personal Safety Measures

Details personal safety practices such as alertness, attire, avoiding unintentional starts, and protective gear.

Tool Usage and Safety

Personal Safety - Continued

Continues personal safety advice, including handling hidden parts and material-specific warnings.

Tool Operation and Maintenance

Provides guidance on safe tool handling, disconnection, and maintenance to prevent injury.

Service and Air Source Safety

Covers safety protocols for tool servicing and warnings related to air source pressure and gases.

Product Specifications and Requirements

Technical Specifications

Details technical specifications including display, units, accuracy, pressure range, and battery.

Tools Required for Setup

Lists the necessary tools required for the installation and setup of the inflation tool.

Installation and Setup

Connecting to Air Compressor

Step-by-step instructions for connecting the inflation tool to an air compressor.

Operating the Inflator

Setting Up the Inflator

Instructions on turning on the device, selecting units, and understanding display backlight behavior.

Inflator Operation Steps

Guides on how to use the inflator, including connecting to the air supply and adjusting pressure.

Maintenance and Troubleshooting

Battery Replacement

Procedure for replacing the batteries in the inflation tool.

Troubleshooting Guide

Provides common symptoms and their corrective actions for troubleshooting the device.

Warranty Information

Limited Warranty Terms

Details the duration and terms of the limited warranty for the inflation tool.