To Next PageTo Next Page
Need help?Do you have a question about the Powermatic PJ-882 and is the answer not in the manual?
General| Type | Jointer |
|---|---|
| Motor Power | 3 HP |
| Cutting Width | 8 inches |
| Voltage | 230V |
| Cutterhead Speed | 5000 RPM |
| Cutterhead Diameter | 3 inches |
| Number of Knives | 4 |
| Table Size | 8 x 72 inches |
| Dust Port Diameter | 4 inches |
| Table Height | 34 inches |
| Cutting Depth | 1/8 inch |
| Phase | Single-phase |
| Amperage | 15A |
Lists critical safety rules for operating the jointer to prevent injury.
Instructions for dust collection setup and electrical grounding safety.
Provides detailed steps to ensure the infeed and outfeed tables are parallel.
Explains how to use cam adjustment devices for table coplanarity.
Guides on setting the outfeed table level with the knife's highest point.
Details using a knife setting gauge for precise knife alignment.
Instructions on tightening gib screws and securing knives.
Step-by-step instructions for removing and installing knives on the straight cutterhead.
How to replace helical inserts and eliminate table play.
Explains controls, safety key, and essential pre-operation checks.
Covers hand placement, surfacing, edge jointing, and rabbeting.
Instructions on sharpening knives and performing cutterhead maintenance.
Lists common operating problems and their remedies.
Addresses problems like machine not starting, tripping breakers, or motor issues.
