Need help?Do you have a question about the Powermatic PF3-JR and is the answer not in the manual?
General| Cutterhead Speed | 10, 000 RPM |
|---|---|
| Motor Voltage | 115 V |
| Voltage | 115V |
| Amperage | 15 A |
| Maximum Cutting Depth | 1/8 inch |
| Maximum Material Thickness | 6 inches |
| Weight | 77 lb |
| Width Capacity | 6 inches |
Details on obtaining up-to-date product information and company resources.
Details coverage, period, exclusions, and holder.
Provides instructions on how to get service and what information is needed.
Explains warranty limitations and how state law may apply.
Warns about dust and chemicals from operations and how to reduce exposure.
Defines the meaning of CAUTION and WARNING symbols used in the manual.
Describes the PF3-JR Stock Feeder's function as a "third hand" for feeding workpieces.
Lists detailed technical specifications for the PF3-JR Stock Feeder.
Lists all items included in the shipping container for the PF3-JR Stock Feeder.
Explains 115V operation and the use of adapters for grounding.
Explains how to adjust the vertical column and horizontal arm of the stand.
Details how to orient the stock feeder for "edgewise" feeding along the workpiece side.
Provides fundamental instructions for operating the stock feeder safely and effectively.
Details how to set up and operate the stock feeder when used with a shaper.
Explains optimal positioning and usage when the stock feeder is paired with a table saw.
Provides instructions for using the stock feeder with a jointer.
Details the steps for removing and replacing the feeder rollers.
Instructions for checking and changing the oil in the gearbox.
Details the greasing schedule and procedure for the rollers.
Recommends lubricating drive chains every three months or as needed.
Advises applying a light coat of grease to the lead screws for smooth movement.
To Next Page
