To Next PageTo Next Page
Need help?Do you have a question about the Powermatic PM2000 and is the answer not in the manual?
General| Type | Cabinet Saw |
|---|---|
| Motor Power | 3 HP |
| Voltage | 230 V |
| Rip Capacity Left | 12 inches |
| Table Size | 27 x 40 inches |
| Power Source | Electric |
| Phase | Single Phase |
| Arbor Diameter | 5/8 in |
| Max. Depth of Cut at 90 Degrees | 3-1/8 inches |
| Max. Rip Right of Blade | 50 inches |
| Dust Collection | 4-inch port |
| Blade Diameter | 10 inches |
Covers warranty coverage, exclusions, and duration for Powermatic products.
Explains how to get service and applicable state laws and limitations.
Guide to removing the saw from packaging and verifying parts.
Instructions for attaching extension tables to the saw.
Covers controls, dust chute, blade, guards, and switches.
How to adjust blade height, tilt, and castor system.
Steps for aligning miter slots, tilt stops, and riving knives.
Explains the function of the power switch and safety key.
Identifies causes of kickback and methods to prevent it.
Guides for ripping, crosscutting, bevel, and dado operations.
Routine maintenance tasks for cleaning and lubrication.
List of available accessories for the table saw.
Electrical schematics for different motor and voltage setups.
