Powersmart DB2821 - Symbols

10
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATIONS
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
min
Minutes
Time
Direct Current Type or a characteristic of current
n
o
No Load Speed
Rational speed, at no load
/min
Per Minute Revolutions, strokes, surface speed,
orbits etc., per minute
Safety Alert Indicates a potential personal injury hazard.
Wet Conditions Alert Cutting/dismemberment hazard of hand.
Keep hands away from the rotating blade.
WARNING To reduce the risk of injury, user must
read instruction manual.
Eye Protection Wear eye and hearing protection. For
protection against injury, wear ear
defenders and safety goggles.
Keep Hands and Feet
Away
Keep hands and feet away from blade and
cutting area.
No Reach
Severing of toes or fingers by rotary mower
blade.
Slip on slope hazard Slip on slope hazard – Use extra caution
when mowing on slopes to prevent slip and
fall accidents.
Keep Bystanders Away Keep all bystanders at least 100 ft. away.
CAUTION Objects picked up and thrown by the rotating
blade can cause severe injury.