powersoft DigiMod 1500 Service Manual

5
DigiMod 500 1000 1500 2000HV 1000NPS | SERVICE MANUAL
INDEX
2. Opening the Module’s cover:
Remove the Control Board by unscrewing the two steel
spacers with a M5 socketed wrench and un-clipping the
retainers highlighted in (Fig. 1)
(Fig. 1)
Locate and unscrew all 6 Phillips Head Screws holding
the module’s cover, 3 per side. (Fig. 2,3)
(Fig. 2)
(Fig. 3)
Carefully lift the cover, locate and unplug the fan’s power
cable. (Fig. 4)
(Fig. 4)

powersoft DigiMod 1500 Specifications

General

Brand	powersoft
Model	DigiMod 1500
Category	Amplifier
Language	English