To Next PageTo Next Page
Need help?Do you have a question about the powersoft Mezzo Series and is the answer not in the manual?
General| Class | D |
|---|---|
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Channels | 2 |
| DSP | Yes |
| Networking | Yes |
| Power Supply | Switching |
| Operating voltage | 100-240V AC, 50/60Hz |
| Signal to Noise Ratio | > 100 dBA (typical) |
| Input Impedance | 20 kΩ balanced |
| Damping Factor | > 500 @ 100 Hz |
List of items included in the product box.
Guidance on where to install the amplifier for optimal performance.
Explanation of the amplifier's temperature-controlled cooling system and fan modes.
Overview of amplifier configuration methods: automatic and advanced software use.
Information on Dante/AES67 integration and its priority over analog inputs.
Details on analog input mixing and GPI functionality for 4-channel models.
Explanation of output routing and GPI control for 2-channel models.
Diagram illustrating output connector pin assignments for 2-channel models.
Diagram illustrating output connector pin assignments for 4-channel models.
Diagram showing balanced input pin assignments for channels 3 and 4.
Diagram showing balanced input pin assignments for channels 1 and 2 on 4-channel models.
Diagram showing line level output pin assignments for channels 3 and 4 on 2-channel models.
Diagram illustrating the pinout for the General Purpose Interface (GPI).
Pinout configuration for the RJ45 Ethernet network connector.
Detailed diagram and labels for the rear panel of 2-channel Mezzo amplifiers.
Detailed diagram and labels for the rear panel of 4-channel Mezzo amplifiers.
