To Next PageTo Next Page
Need help?Do you have a question about the powersoft Duecanali 3904 and is the answer not in the manual?
Essential safety guidelines for operating the amplifier to prevent hazards.
Specific warnings for installation, environment, and handling.
Identifies components and connectors on the front and rear panels.
Covers unpacking, rack mounting, and thermal considerations.
Details AC mains connection and grounding requirements.
Explains analog/AES3 inputs and speaker outputs for various modes.
Details GPIO control, alarms, remote connections, and amplifier configuration.
Overview of front panel controls, display, and general setup.
Overview of the DSP chain and settings menu organization.
Adjusting output attenuation, input gain, and selecting input sources.
Setting voltage/current limits and configuring clip limiters.
Configuring power-on muting and power-saving idle mode.
Choosing input sources, configuring AES3, and adjusting gain.
Configuring EQ, filters, gain, and limiters for individual channels.
Detailed setup of the peak limiter for preventing mechanical damage.
Configuring RMS and TruePower limiters for thermal protection.
Setting power limits and using damping control.
Setting delay, running diagnostics, and resetting sections.
Overview of AESOP, network capabilities, and modes.
Setting up how AES3 streams are routed through ports.
Discusses network fault tolerance and daisy chain connections.
Explains daisy chain and intermediate robust chain setups.
Explains how the system handles connection failures and backups.
Configuring device mode, IP addressing, and audio sources.
Selecting source modes, trimming gain, and viewing display info.
Configuring preset locking and loading stored presets.
Detailed steps for saving and naming presets.
Accessing details about amplifier hardware and system parameters.
Explains muting during power cycles and short circuit protection.
Details thermal protection and DC fault protection mechanisms.
Guidelines for cleaning, servicing, and dust filter removal.
Information on obtaining support and understanding error codes.
Instructions for inserting and using SmartCards for preset storage.
Overview of Armonía software and third-party control options.
Visual representation of output stage and power supply architecture.
Provides physical dimensions and rack mounting information.
Details general features, power, thermal, audio, and DSP specs.
Details specs for DSP+AESOP model, including connectivity.
Details general features, power, thermal, audio, and DSP specs for 5204.
Details specs for DSP+AESOP model, including connectivity.
General