powersoft Duecanali 3904 User Manual

▶
36
Duecanali User Guide
12.4 Save local preset
Save to an empty slot
To save a current amplier setup as a preset to the local memory,
enter the “Save local preset” menu. Select a non used preset
which is labelled empty:
Select preset #1
<empty>
back
ok
FIGURE 62: Preset memory location number 1 is empty
After pressing “ok”, the user is asked whether to keep the current
preset name or change it. The current preset name will be
“PRESET” followed by the selected memory slot name if no other
preset has been loaded in the amplier either via remote control
or using a SmartCard.
Keep this name?
no
yes
PRESET1
FIGURE 63: Pressing “yes” will write the current setup to preset
number one and will name it “PRESET 1”. Pressing “no” will allow the
user to change the preset name
By pressing “no”, the preset name can be edited. The preset name
can be edited one character at a time. The arrow points towards
the active character that is currently being edited. To move from
one character to the next, press the “sel” button. The “+” and “-”
buttons allow to navigate within a standard set of capital letters
and basic punctuation marks.
ABCDEFGHIJKLMNOPQRST
UVWXYZ !"#$%&'()*+,-
./0123456789:;<=>?@
FIGURE 64: The list of available characters
When the preset has been correctly saved with the name entered
by the user entered, a conrmation screen will appear (see
FIGURE 65).
Preset saved.
back
FIGURE 65: Preset saved conrmation screen
Overwriting an existing preset
If the preset location is not empty, the amplier will ask the user
conrmation to overwrite the le. Note that if you have already
input a preset name, or if you have loaded a preset from local
memory or a SmartCard, the name is used as starting point for
a new save preset operation. For example, suppose that a preset
named “18IN SUB 1” has been loaded from a SmartCard with the
purpose of saving it in the amplier’s local memory in the preset
slot number 3, as show in FIGURE 66:
Select Preset #3
PRESET 3
back
ok
FIGURE 66: Preset slot number 3 being selected to accommodate the
preset loaded from the SmartCard.
In this case the amplier asks the user whether to keep the preset’s
name as loaded from the SmartCard or change it. This is useful for
copying presets from/to SmartCard.
Keep this name?
18IN SUB 1
no
yes
FIGURE 67: Keep this name conrmation screen
By pressing “no” the system will enter in a text editing mode,
allowing the user to choose a preset name. For details on text
editing, see section “Save local preset” on page 36. By pressing
“yes”, the user is prompted to conrm the intention of overwriting
the preset.

powersoft Duecanali 3904 Specifications

General

Brand	powersoft
Model	Duecanali 3904
Category	Amplifier
Language	English