PowerSpec Pro 3D Printer - Default Chapter; Table of Contents

i
Contents
1 What's Included in the Box? 2
2 Un-boxing 2
3 Initial Hardware Installation 6
4 Software Installation 8
5 USB Connection & Temperature Setting 12
6 Filament 16
6.1 Install Filament 16
6.2 Feeding the Filament Using the LCD Screen 17
6.3 Withdrawing the Filament Using LCD Screen 17
6.4 Feeding the Filament Using Replicator G Control Panel 18
6.5 Setting Parameters 19
7 Initial Print 19
8 Dual Extruder Print 23
TROUBLESHOOTING 25