Need help?Do you have a question about the PowerTap P1 and is the answer not in the manual?
General| Type | Pedal-based power meter |
|---|---|
| Power Measurement | Dual-sided |
| Battery Life | 60 hours |
| Power Accuracy | +/- 1.5% |
| Q-Factor | 53mm |
| Stack Height | 14mm |
| Release Tension | Adjustable |
| Water Resistance | IPX7 |
| Communication Protocol | ANT+, Bluetooth |
| Battery Type | AAA |
| Weight | 398g (pair) |
| Crankset Compatibility | All major brands |
How to securely attach PowerTap P1 pedals to crank arms using an 8mm hex key.
Instructions for mounting PowerTap P1 cleats to cycling shoes, ensuring proper engagement.
Adjusting the pedal release tension using a 2.5mm hex wrench for rider preference.
Explains the two-stage wake-up process for pedals to conserve battery life.
Steps to pair the PowerTap P1 pedals (master/slave) with a display unit via ANT+ or Bluetooth.
How to set the crank arm length on the display unit for accurate power output.
Describes the one-time process for pedals to establish pedal axle position.
Procedure for periodically zeroing the pedal offset for accurate power readings.
Explains how active temperature sensors ensure accurate data across environmental changes.
Step-by-step guide for replacing the pedal batteries using a 6mm hex key.
How to update pedal firmware wirelessly using the PowerTap Mobile App.
Warnings against water immersion, chemicals, and strong magnets for pedal safety.
Recommendations for removing batteries during extended periods of non-use to prevent drain.
Details the limited warranty for PowerTap P1 pedals, coverage, and exclusions.
Outlines limitations on warranties and liability for damages or losses.
Explains the process for obtaining warranty service through Saris Cycling Group or dealers.
Explains the meaning of different LED blink patterns and colors on the pedals.
To Next Page