EasyManua.ls Logo

PowerTec PT2200i - Noise and Extension Cord Safety; Noise Exposure Hazards; Extension Cord Selection Guidelines

PowerTec PT2200i
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.
9.
www.powertec.net.nz
www.powertec.net.nz
PT2000i DIGITAL INVERTER GENERATOR
Be aware that when engine parts are moving
fast they cannot be seen clearly.
Keep access doors on enclosures closed
and locked when access is not required.
When working on or around the generator
always wear protective clothing including
AS/NZS approved safety gloves, safety
eye goggles, and safety hat.
Do not alter or adjust any part of the gen-
erator that is assembled and supplied by
the manufacturer.
Always follow and complete scheduled en-
gine and generator maintenance.
Chemicals
Avoid contact with hot fuel, oil, exhaust
fumes, and hot solid surfaces.
Avoid body contact with fuels, oils and
lubricants used in the generator. If swal-
lowed, seek medical treatment immedi-
ately. Do not induce vomiting if fuel is swal-
lowed. For skin contact, immediately wash
with soap and water. For eye contact, im-
mediately ush eyes with clean water and
seek medical attention.
Noise
Prolonged exposure to noise levels above
85dBA is hazardous to hearing. Always wear
AS/NZS approved ear protection when oper-
ating or working around the Generator when
it is running.
Extension Cords
If an extension cord (not included) is used,
make sure to use only AS/NZS approved
cords having the correct gauge and length
according to the following table:

Related product manuals