ASSEMBLY
Grounding
It is recommended that your generator ir be properly
connected to an appropriate earth to help prevent electric
shock.
A ground terminal connected to the frame of the generator
has been provided on the power panel. For remote
grounding, connect of a length of heavy gauge (12 AWG
minimum) copper wire between the generator ground
terminal and a copper rod driven into the ground. We
strongly recommend that you consult with a qualified
electrician to ensure compliance with local electrical codes.
Failure to properly ground the generator may result
in increased risk of electric shock.
WARNING
10.
www.powertec.net.nz
PT3300Ei
3300W DIGITAL
INVERTER GENERATOR
To Next Page
Loading...
