EasyManua.ls Logo

PowerTec PT3300Ei - Specifications; Fuel; Oil; Spark Plugs

PowerTec PT3300Ei
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Oil
Use SAE30 automotive oil.
Oil capacity is up to 0.6 L (0.6 qt.).
DO NOT OVERFILL
Please reference the following chart for recommended
oil types for use in the generator.
Fuel
Fuel capacity is (14L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
Spark Plugs
OEM spark plug:
TORCH F6RTC
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
An Important Message About Temperature
Your product is designed and rated for continuous
operation at ambient temperatures up to 40°C (104°F).
When your product is needed your product may be
operated at temperatures ranging from -15°C (5°F) to
50°C (122°F) for short periods. If the product is exposed
to temperatures outside this range during storage, it
should be brought back within this range before operation.
In any event, the product must always be operated
outdoors, in a well-ventilated area and away from doors,
windows and other vents.
Weather will affect engine oil and engine
performance. Change the type of engine oil used
based on weather conditions to suit the engine
needs.
NOTE
Full Synthetic 5W-30
Degrees Celsiusº(Outside)
Degrees Fahrenheitº(Outside)
19.
www.powertec.net.nz
PT3300Ei
3300W DIGITAL
INVERTER GENERATOR

Related product manuals