OPERATING INSTRUCTIONS
Connection
1. Connect the DC Clamps to the battery poles in the following
order:
2. Connect the positive charging lead (RED) to the positive
terminal pole of the battery (marked P or +).
3. Connect the negative lead (BLACK) to the negative pole of the
battery (marked N or -).
4. It is important to ensure that both DC Clamps are making good
contact with their respective terminal poles.
Control Panel
1. Char
ge Rate Button sets the charge rate to one of the
following:
2A DC Slow - Intended for charging small
batteries such as those commonly used in
garden tractors, snow mobiles and
motorcycles. The 2A rate is not intended
to be used as a trickle charger for larger
batteries.
10A DC Normal - Use for charging
automotive batteries, marine batteries,
and deep cycle batteries at a normal rate.
15A DC Fast - Use for charging
automotive batteries, marine batteries,
and deep cycle batteries at a fast rate.
6
To Next Page
Loading...
