6) Maintenance and Disposal
6.1 Maintenance
The maintenance operations must be performed in strict compliance with the safety directions provided in the manual
and according to the applicable legislation and standard.
In order to have good and safety performances, test the gate-automated system weekly and have qualified
installation personnel to check and maintain the system at least every 6-month.
6.2 Disposal
Some electronic components and the batteries may contain polluting materials; do not pollute the environment. Make
sure the recycling or disposal systems available under the regulations locally in fore.
PL600/PL1000 are consist of different types of materials; some of them can be recycled such as aluminum, plastic,
electric cables while some need to be disposed, such as electronic boards.
7) Additional Information
7.1 Adding or Removing Device
After you have added or removed any devices, the automation system must be tested again according to the
operation mentioned in paragraph 5 “Testing”.
8) Technical Characteristics
8.1 PL600/ PL1000
2pcs of batteries for emergency
operation, 1.2A each, 1.1kg
2pcs of batteries for emergency
operation, 1.2A each, 1.1kg
To Next Page
Loading...
Need help?
General
