Version 1.3-130603
6
5. Introduction & Operation
Please read the instructions carefully before you install and operate the
inverter.
This power inverter series is one of the most advanced and high-quality
types available.
To get the most optimum power from the inverter, it must be installed and
used properly. The AC output voltage corresponds to the standard pure
sine wave as supplied by energy authorities (as per AS 60038).
5-1. Inverter Operation:
Make sure the inverter power switch is in the OFF position.
Connect the inverter to a fully charged battery.
Use the “ON/OFF” switch to turn the inverter ON or OFF.
Connect the electric appliance to AC output socket of the inverter.
Turn the inverter “ON” – the Green LED should light up, indicating power is on
and inverter is functional. Appliance can now be used.
When finished, turn inverter power switch to “OFF” position, this will shut down
the inverter
When using wired remote controller make sure the inverter “ON/OFF” Switch is
in the “ON”position.
5-2. Front Panel Operations
To Next Page
Loading...
Need help?
General
