Picture A Picture B
Multi-wedge Belt Tension Adjusting
After some time, the multi-wedge belt is expected to become loose as a result of the
abrasions, which will require the user to adjust the multi-wedge to ensure continued
safe use.
When to Adjust? Feeling of running with the occasional pause/slipping experienced,
indicates that the treadmill belt or multi-wedge belt are a little loose and further
assessment/confirmation is required.
Step 1: Which part is loose? Remove the four screws on protective cover, turn the
running speed to 1 km/h, stand on the running belt, grip the armrests, and tread the
treadmill belt slightly.( we advise treading the treadmill belts with the user's own weight)
o A. If instantaneous steps cannot stop the belt, the tightness is appropriate.
o B. If your instantaneous step stops the running belt, but the multi-wedge belt and
former roller is still running, it indicates that the running belt is loose and
appropriate adjustments must be made to facilitate the safe use
o C. If you observe that the instantaneous step makes both the treadmill belt and
multi-wedge belt stop, but the motor is still running, it indicates that the
multi-wedge belt is loose and appropriate adjustments must be made to
facilitate continuous safe use
Step 2: Use a wrench to adjust the screws on the motor base according to the condition.
Gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too
loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to
flip the belt is very limited. It is appropriate to flip the multi-wedge belt by 80% after
adjustment. Please adjust the tightness of the multi-wedge belt into the state that it
could be flipped by 80%.
Step 3: Lock the motor base, and re- install the front cover.
Exercise Instructions
Using your Powertrain treadmill provides you with several benefits such improving your
physical fitness, toning muscles and together with a calorie controlled diet may help you
lose weight.
To Next Page
Loading...
Need help?
General