Start - starts after 5 seconds of countdown.
Programs - 1 manual mode, 3 modes, 12 automatic programs, 1 FAT program.
Safety lock function - Disconnecting the safety key will result in error "E7" displayed
on the screen. Treadmill will immediately slow down and a "Di" tone will be emitted.
Repositioning the safety key on the console will reset the data in 2 seconds.
Key function - Start button/Stop button:
o Start Button: Running mat will start and screen will display "0.8 km/h".
o Stop Button: When treadmill is in motion, press the stop button, all data will be
cleared, and the treadmill comes to a complete stop and reset to manual mode.
Program Button - Scrolls from manual mode to automatic programs (P1 - P12).
Manual mode is the treadmill's default running mode with the default speed of 0.8 km/h,
and maximum speed of 14.8km/h.
Mode key: Scrolls through 3 countdown modes when in standby mode:
o Time countdown, distance countdown and calorie countdown.
o Use speed Up/Down buttons to select the countdown value. When the setting is
completed, press the "Start" button to start the treadmill.
Speed increase and decrease Buttons: Use these buttons to adjust the
speed by 0.1Km/h intervals.
o Holding down for more than 2 seconds will increase/decrease speed continuously.
o These two buttons are also located on the hand grips.
Speed shortcut keys
Speed of 1.0 km/h
Speed of 3.0 km/h