Need help?Do you have a question about the PowerWalker VI 1000RT LCD and is the answer not in the manual?
General| Input Voltage | 220/230/240 VAC |
|---|---|
| Output Voltage | 220/230/240 VAC |
| Battery Capacity | 9 Ah |
| Number of Batteries | 2 |
| Display | LCD |
| Output Waveform | Pure Sinewave |
| Form Factor | Tower |
| Capacity | 1000 VA |
| Frequency | 50/60 Hz |
| Battery Type | Sealed Lead Acid |
| Typical Backup Time at Full Load | 5 min |
| Transfer Time | ≤10ms |
| Typical Recharge Time | 4-6 hours |
| Outlets | 4 x IEC C13 |
| Communication | USB |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -15 to 45 °C |
| Humidity | 0% to 90% non-condensing |
To Next Page