To Next PageTo Next Page
Need help?Do you have a question about the PowerWalker VI 2000 LCD and is the answer not in the manual?
General| Battery Capacity | 9 Ah |
|---|---|
| Number of Batteries | 2 |
| Power Rating | 2000 VA |
| Input Voltage | 230 VAC |
| Output Frequency | 50/60 Hz |
| Transfer Time | ≤10 ms |
| Typical Recharge Time | 4-6 hours |
| Indicators | LCD |
| Audible Alarm | Yes |
| Protection | Overload |
| Communication | USB |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 0 - 90 % RH @ 0-40°C (Non-condensing) |
Lists critical safety advice for operating and installing the UPS.
Explains the eco-friendly design features and benefits of the UPS charging system.
Lists all items included in the UPS package for the user.
Details the components and indicators visible on the front of the UPS unit.
Shows the location of ports and connectors on the rear of the UPS.
Explains the functions of the LCD screen indicators and displays.
Guidelines for optimal placement and storage environment for the UPS unit.
Instructions for connecting the UPS to a power source and initial battery charging.
Steps for connecting devices to the UPS output receptacles.
How to connect telecommunication lines for surge protection.
Instructions for connecting the UPS to a PC using the USB cable for monitoring.
Procedures for powering the UPS unit on and off using the power switch.
