PowerWalker VI 2000 LCD - Specifications

EN
8. Specifications
Model
VI 450 LCD
VI 650 LCD
VI 850 LCD
CAPACITY
450 VA / 240 W
650 VA / 360 W
850 VA / 480 W
INPUT
Voltage
220~240 VAC
Voltage Range
162~290 VAC
Frequency Range
50/60Hz±1Hz
OUTPUT
Voltage Regulation
+/-10%
Transfer Time
Typical 2-6 ms, 10 ms max.
Waveform
Simulated Sine Wave
Protection
Short circuit and overload protection
BATTERY
Type & Number
12V / 4.5Ah x 1
12V/ 7Ah x 1
12V/ 9Ah x 1
Charging Time
4-6 hours recover to 90% capacity
Protection
Discharge and overcharge protection
Backup Time (est. 120W)
5 min
10 min
15 min
PHYSICAL
LCD Indicator
Input/output voltage, AC mode, Load level, Battery capacity
Dimension (DxWxH)
287mm x 100mm x 142mm
ENVIRONMENT
Humidity
0-90 % RH @ 0-40° C (non-condensing)
Noise Level
Less than 40 dB
Model
VI 1000 LCD
VI 1500 LCD
VI 2000 LCD
VI 3000 LCD
CAPACITY
1000 VA / 600 W
1 500 VA / 900 W
2 000 VA / 1200 W
3000 VA/1800 W
INPUT
Voltage
220/230/240 VAC
Voltage Range
162~290 VAC
F requency Range
50/60 Hz (Auto sensing)
OUTPUT
Voltage Regulation
+/-10%
Frequency Range
50 or 60 Hz +/-1 Hz
Transfer Time
Typical 2-6 ms, 10 ms max.
Waveform
Simulated Sine Wave
BATTERY
Type & Number
12V / 7Ah x 2
12V / 9Ah x 2
12V / 9Ah x 2
12V / 9Ah x 4
Charging Time
4-6 hours recover to 90% capacity
Protection
Overload, discharge and overcharge protection
Backup Time
(est. 240W)
11 min
18 min
20 min
40 min
PHYSICAL
LCD Indicator
Input/output voltage, AC mode, Load level, Battery capacity
Dimension
(DxWxH)
350x146x160 mm
397mm x 146mm x 205 mm
495 mm x 150mm x
250 mm
ENVIRONMENT
Humidity
0-90 % RH @ 0-40° C (non-condensing)
Noise Level
Less than 40 dB