charging current, there is no need to install thick wiring. The XC3 also acts
as a battery guard. If the terminal voltage of the starter battery is too low,
the XC3 switches the battery off so that the starter battery does not
discharge further. Charging with a solar panel is also possible. However, a
suitable charge regulator must be used for this.
3.5 Storage
If you want to store the battery for a longer period of time, disconnect the
battery terminals. This will prevent the battery from being discharged by
slumber consumption. Also disconnect the charging current connector
from the battery. The battery has a very low self-discharge and can be
stored for up to half a year without any problems. Charge the battery after
half a year.
3.6 Installation
The following is important for the installation of the battery:
▪ In the box, you will find the following parts:
- Battery with charger mounted inside
- Battery terminals + and –
- Mounting plate with Velcro and 4 self-tapping screws
- Charging cord 230V
- Instruction card
To Next Page
Loading...
