Need help?Do you have a question about the PowerXtreme X30 and is the answer not in the manual?
Explains the BMS role in monitoring and protecting against discharge, voltage, temperature, and short circuits.
Explains WARNING, CAREFUL, PAY ATTENTION symbols and general advice on manual use and electrolyte handling.
Covers cable handling, short-circuiting, parallel connections, starter battery use, opening, and environmental exposure.
Details safe storage, charging temperatures, periodic charging, and using approved chargers to prevent damage.
Covers connecting the charger, LED status (red/green), and reading capacity with LEDs.
Lists the included accessories and preparation steps before installation.
Instructs to check for damage upon unpacking and fully charge the battery before its first use.
Prohibits use of the battery in areas with explosion hazards or flammable materials.
Details mounting procedures, required clearance around the battery, and avoiding unventilated spaces to prevent overheating.
Explains how to identify positive and negative terminals by their differing diameters for correct connection.
Warns about the importance of correct polarity and avoiding short circuits to prevent equipment damage.
Explicitly forbids connecting the battery in parallel with other batteries or vehicle wiring.
Repeats the critical warning against connecting the battery in parallel with other batteries, including vehicle wiring.
Offers a fault-finding table with problems, causes, and solutions for charger and battery issues.
General| Battery Type | Lithium-Ion |
|---|---|
| Voltage | 7.4V |
| Color | Black |
| Material | Plastic |
| Weight | 150g |
To Next Page
